GLOW 70MG KIT

GLOW 70MG is a research peptide blend combining GHK-Cu, TB-500 (Thymosin Beta-4 fragment), and BPC-157 in one 70 mg vial. Each component has been studied for its regenerative and healing properties across various tissues. By delivering all three in one formulation, GLOW aims to synergistically promote tissue repair, inflammation reduction, and wound healing beyond what each peptide might achieve alone.

GLOW 70MG

GHK-Cu: A copper peptide widely studied for its role in collagen production, skin remodeling, and wound healing.

BPC-157: A peptide evaluated for its tissue regeneration properties and anti-inflammatory effects.

TB-500 (Thymosin Beta-4): Focuses on cellular regeneration, tissue repair, and flexibility

POTENTIAL BENEFITS OF GLOW

Accelerated Wound Healing: All three components have shown the ability to speed up the repair of injuries. Thymosin β4 significantly improved the closure rate of chronic skin wounds in clinical trials and animal models, while also reducing excessive scar formation. BPC-157 has demonstrated enhanced healing in tendon ruptures, muscle tears, bone fractures, and even stomach ulcers in preclinical studies. GHK-Cu likewise aids wound contraction and epithelialization in skin, promoting faster regeneration of damaged tissue.

Anti-Inflammatory & Pain Reduction: Each peptide has inherent anti-inflammatory effects that can mitigate pain and swelling at injury sites. GHK-Cu downregulates inflammation-related genes (like NF-κB) and has been noted to reduce oxidative damage and even pain behaviors in studies. TB-500 suppresses key inflammatory cytokines (such as IL-6, TNF-α) and was shown to create a more anti-inflammatory healing environment. BPC-157 markedly dampens tissue inflammation in injury models, which contributes to less edema and discomfort during recovery.

Improved Tissue Quality & Reduced Fibrosis: TB-500 helps minimize fibrous scar tissue in healing wounds—it was observed to decrease myofibroblast accumulation, leading to more orderly tissue architecture and less scarring. BPC-157 has similarly been associated with organized collagen deposition in injured muscle and tendon, resulting in stronger, more functional repair tissue. GHK-Cu contributes by boosting proper collagen and extracellular matrix production. Collectively, the blend supports higher quality healing—meaning repaired tissues more closely resemble the original, with better tensile strength and flexibility.

Multi-Tissue Regeneration: A unique advantage of the GLOW blend is its applicability to various tissues and systems, from orthopedic injuries (tendon, ligament tears, muscle strains, fractures) to dermatologic uses (skin rejuvenation, wound care) and potentially gastrointestinal repair (ulcers, gut lining integrity).

Note: These benefits are based on emerging research. Large-scale human clinical trials are still needed to confirm efficacy and safety for specific indications.

HOW THIS WORKS

The three peptides in GLOW operate via distinct but complementary biological pathways to enhance healing and repair.

GHK-Cu acts as a genomic modulator—it can upregulate a broad array of genes related to tissue growth and downregulate those linked to inflammation and tissue breakdown. Notably, GHK-Cu stimulates collagen and glycosaminoglycan synthesis in fibroblasts, promotes angiogenesis (formation of new blood vessels), and exhibits antioxidant and anti-inflammatory properties (for example, it suppresses NF-κB activity). These actions translate to improved wound contraction, tissue remodeling, and even anti-aging effects in skin.

TB-500 (Thymosin β4) primarily facilitates cell migration and cytoskeletal remodeling. After an injury, endogenous thymosin β4 is released by platelets and immune cells to protect tissues from further damage[4]. TB-500 mimics this by binding to actin, a key cell structural protein, and promoting the mobilization of cells to the injury site[4]. It thereby accelerates angiogenesis (new capillary growth) and recruits stem and progenitor cells, which aid in regenerating damaged tissues. TB-500 also has anti-apoptotic effects (reducing cell death) and modulates immune cells to limit excessive inflammation and fibrosis. One outcome of this mechanism is reduced scar tissue formation and more organized healing in wounds.

BPC-157 triggers a multi-factorial healing response. It is known to enhance growth factor signaling (e.g., increasing receptors for VEGF and PDGF) and upregulate nitric oxide pathways, leading to improved microcirculation in injured tissue[5]. BPC-157 also directly counteracts inflammatory mediators—it lowers pro-inflammatory cytokines and increases anti-inflammatory factors at injury sites[5]. On a cellular level, BPC-157 promotes the migration and survival of repair cells (fibroblasts, endothelial cells, etc.). For instance, in tendon cells it activates the FAK-paxillin pathway to increase cell movement and adhesion for repair[6]. Additionally, BPC-157 supports the formation of new blood vessels (angiogenesis) similar to growth factors, helping deliver nutrients for regeneration[5]. Through these mechanisms, BPC-157 has demonstrated accelerated healing in diverse tissues (muscle, tendon, bone, gut) in preclinical models.

By combining GHK-Cu, TB-500, and BPC-157, GLOW leverages these synergistic pathways—collagen synthesis, cell migration, angiogenesis, and inflammation control—to create an optimal environment for tissue repair. The net result observed in research is faster wound closure, stronger tissue regeneration, and reduced fibrosis compared to normal healing processes.

POTENTIAL SIDE EFFECTS AND PRECAUTIONS

Generally, well tolerated based on existing research. Occasional mild injection-site reactions (redness, itching) may occur with subcutaneous administration. The component peptides have demonstrated wide safety margins in preclinical and early clinical studies.

RECONSTITUTION INSTRUCTIONS

RECONSTITUTION:

Draw 3.0 mL bacteriostatic water with a sterile syringe.

Inject slowly down the vial wall to minimize foaming.

Gently swirl or roll the vial until fully dissolved (do not shake vigorously).

Label with reconstitution date and refrigerate at 2–8 °C (35.6–46.4 °F), protected from light.

Use within 4 weeks for optimal potency and safety.

Important: This guide is for educational purposes only and is not medical advice. For research use only. Not for human consumption.

Complementary strategies to optimize tissue healing outcomes.

Reconstitute: Add 3.0 mL bacteriostatic water → ~23.3 mg/mL concentration.

Typical daily dose: 2,330 mcg (2.33 mg) once daily for 4 weeks.

Easy measuring: At 23.3 mg/mL, 1 unit = 0.01 mL ≈ 233 mcg on a U-100 insulin syringe.

STORAGE AND STABILITY

Vials are shipped as lyophilized powder, requiring no refrigeration during shipping.

IN LYOPHILIZED FORM:

Stable for up to 3 years in the freezer and 2 years in the refrigerator.

Protect from light.

ONCE RECONSTITUTED:

Stable for 4-6 weeks.

Must be refrigerated and kept away from light.

Avoid placing vials in the refrigerator door to prevent degradation from frequent temperature changes.

DOSAGE GUIDELINES

15 UNITS DOSAGE = 24.7mg/mL , once daily for 5 days / 4 weeks

Or

10 UNITS DOSAGE -23.3 mg/mL , once daily for 7 days / 4 weeks

Daily Dose: 2,330 mcg (10 UNITS / 0.10mL) maintained throughout the 4-week cycle.

Frequency: Once per day M-F, weekends off, at a consistent time preferred.

Standard Approach (3 mL = 24.7mg/mL)

Weeks 1–4 2,470 mcg 15 units (0.10 mL) / DAILY

Frequency: Inject once daily Monday- Friday, weekends off for 4 weeks. delivering approximately 1.8 mg GHK-Cu, 0.335 mg TB-500, and 0.335 mg BPC-157 per injection. This once-daily regimen aligns with common research protocols for BPC-157 and similar repair peptides

Cycle Length: 4 weeks of daily dosing, followed by 2–4 weeks off to evaluate progress and allow receptor resetting.

Or

Daily Dose: 2,470 mcg (15 UNITS / 0.15mL) maintained throughout the 4-week cycle.

Frequency: Once per day (subcutaneous), at a consistent time preferred.

Standard Approach (3 mL = 23.3 mg/mL)

Weeks 1–4 2,330 mcg 10 units (0.10 mL) / DAILY

Frequency: Inject once daily subcutaneously. This schedule maintains a consistent dose throughout the 4-week cycle, delivering approximately 1.7 mg GHK-Cu, 0.33 mg TB-500, and 0.33 mg BPC-157 per injection. This once-daily regimen aligns with common research protocols for BPC-157 and similar repair peptides

Cycle Length: 4 weeks of daily dosing, followed by 2–4 weeks off to evaluate progress and allow receptor resetting.

STORAGE AND STABILITY

Vials are shipped as lyophilized powder, requiring no refrigeration during shipping.

IN LYOPHILIZED FORM:

Stable for up to 3 years in the freezer and 2 years in the refrigerator.

Protect from light.

ONCE RECONSTITUTED:

Stable for 4-6 weeks.

Must be refrigerated and kept away from light.

Avoid placing vials in the refrigerator door to prevent degradation from frequent temperature changes.

HOW TO MAXIMIZE RESULTS

Maintain adequate protein intake (1.6–2.2 g/kg body weight daily) to support collagen synthesis and tissue repair.

Implement progressive resistance training and appropriate activity modification based on healing goals.

Prioritize sleep quality (7–9 hours nightly) as the primary recovery window for tissue regeneration.

Manage stress through evidence-based techniques to support optimal healing hormonal environment.

Stay well-hydrated and ensure adequate micronutrient intake, particularly vitamin C, zinc, and copper for collagen formation.

INJECTION TECHNIQUE

Clean the vial stopper and injection site with separate alcohol swabs; allow both to air-dry completely.

Using an insulin syringe (typically 29–31 gauge, 5/16 to 1/2 inch needle), draw up the calculated dose (10 units = 0.1 mL).

Select a site with adequate subcutaneous tissue (common sites include lower abdomen, thigh, or upper arm).

Pinch a fold of skin; insert the needle at approximately a 45° angle into the fatty subcutaneous tissue. With short insulin needles, a 90° angle can also be used if injecting into a pinched skin fold.

Inject slowly over 2–3 seconds; do not aspirate for subcutaneous injections.

Withdraw needle and apply gentle pressure with a clean cotton swab; do not rub the injection site.

Rotate sites systematically with each injection, maintaining at least 1–2 inches spacing between sites to prevent tissue irritation.

Dispose of used syringes and needles immediately in a proper sharps container; never reuse needles.

IMPORTANT DISCLOSURES

These statements have not been evaluated by the US Food and Drug Administration (FDA).

Not intended to diagnose, treat, cure, or prevent any disease.

Compounded drugs and research peptides are not FDA-approved but are produced under strict quality control measures.

Important: This guide is for educational purposes only and is not medical advice. For research use only. Not for human consumption.

PEPTIDES AREA NON-REFUNDABLE. PLEASE MAKE YOUR SELECTION CAREFULLY.

Quality Assurance

The manufacturer ensures quality, safety, and efficacy, complying with regulatory standards.

KIT INCLUDES: VIAL , 3ML BA WATER, 15 INSULIN SIRINGES